How to Access MinisForum UM690 BIOS Key for Advanced Settings

If you’ve got yourself one of them MinisForum UM690 mini PCs and you’re wonderin’ how to get into the BIOS, you ain’t alone. A lot of folks, especially those who ain’t too tech-savvy, sometimes find it a bit tricky. But don’t worry, I’m here to help ya figure it out in simple terms, just like how my old granny would explain it to me.

How to Access MinisForum UM690 BIOS Key for Advanced Settings

Now, first thing you need to know is that the BIOS is like the heart of your computer. It’s where you can change a whole lotta things, like boot options and other settings that make your machine run the way you want it to. And if you’re lookin’ to fiddle with the BIOS on your MinisForum UM690, it’s not that hard if you follow the right steps.

Step 1: Gettin’ Into BIOS

To get into the BIOS, you just gotta hit the right key when you first turn on your computer. Now, I know you might be thinkin’, “Which key?” Well, on the UM690, it’s usually the DEL key. So, when you press that power button and see the screen light up, you better press that DEL key right away. You might need to press it a couple times before it takes, but it’ll work if you’re quick enough.

Step 2: What to Do Once You’re In

Once you’re inside the BIOS, there’s a whole lotta options. Some of ‘em might look like a big mess of words, but don’t worry, it’s simpler than it seems. If you’re lookin’ to turn off Secure Boot (a thing that stops unauthorized programs from runnin’ on your computer), you’ll need to find that setting and disable it. It’s usually under the “Boot” or “Security” tab. After you find it, just press F4 to save the changes.

If you want to change the boot order so that your computer starts from a USB drive or an external device, that’s in the same section too. Just look for “Boot Priority” or something like that, and move your USB drive to the top. That way, your PC will boot from the USB first.

Step 3: Saving and Exiting

Once you’ve done what you need to do, you’ll want to save all your changes. To do that, all you gotta do is hit F10 or look for the “Save and Exit” option in the BIOS menu. This’ll make sure all your settings stick, and the computer will restart. Then, you’ll be back at the normal startup screen.

Step 4: If You Need to Update BIOS

If you’re having trouble with your computer or want to get the latest updates, you might need to update your BIOS. This is a little trickier, but still not too bad if you follow these steps:

First, go to the MinisForum website and look for the support page for your UM690 model.
Find the latest BIOS version and download it to your computer.
Put the BIOS update files on a USB drive (make sure it’s formatted as FAT32).
Next, restart your PC, and when it starts up again, hit DEL to enter BIOS.
Look for an option called “Update BIOS” or something similar, and follow the prompts to update it from the USB drive.

Once that’s done, your system should have the latest updates, and everything will run smoother. You might even notice a little bit faster performance, or some new features that were added in the update.

Step 5: Troubleshooting

Now, if for some reason you can’t see anything on your screen after powering up your UM690, it might mean there’s a problem with how the PC is booting up. Sometimes, the BIOS settings can get a bit messed up, and you might not see the usual boot screen. In that case, you’ll need to reset the BIOS to its default settings. To do this, you can usually find an option to “Load Default Settings” inside the BIOS menu.

And if that doesn’t work, you might have to do a hard reset by taking the battery out for a few minutes. I know that sounds scary, but it’s just a simple trick that helps reset everything back to factory settings.

In Summary

So, there you have it! Getting into the BIOS on your MinisForum UM690 doesn’t have to be complicated. Just remember to hit DEL when you start up your computer, make the changes you need, and save them. If you ever need to update your BIOS or troubleshoot, it’s just a matter of downloading the update, putting it on a USB, and following the prompts. Ain’t too hard, is it?